FANUC GE A06B-2115-B103 AC SERVO MOTOR BIS0.5/6000 B64IA 50/60 HZ 3 PHASE CNC
Product information GE A06B-2115-B103 :
A fine acceleration/deceleration time constant of about 16 is optimal for fine acceleration/deceleration, position feed-forward, and velocity feed-forward cutting. In rapid traverse, however, the setting of a time constant of 32 to 40 ms may be desirable to reduce a shock at the time of acceleration/deceleration. Note that the feed-forward coefficient for figure minimization in cutting is not always the same as the feed-forward coefficient for minimizing time for high-speed positioning by rapid traverse. In such a case, use the cutting feed/rapid traverse switchable fine acceleration/deceleration function.
1. When this function is used, high-frequency vibration can occur, depending on the resonance point of the machine system. In this case, stop the use of this function. If high-frequency vibration occur when a high velocity loop gain is set, use the torque command filter.
2 . Instead of fine acceleration/deceleration, linear acceleration/deceleration after interpolation on the CNC can be used. During batch transfer, do not use fine acceleration/deceleration, but use acceleration/deceleration after interpolation on the CNC software side.
3 . For rapid traverse, a time constant of about 40 to 64 ms is required to perform high-speed positioning by fine acceleration/deceleration plus feed-forward. In this case, use the cutting feed/rapid traverse switchable fine acceleration/deceleration function
- Category: Servo Motor
- Series BiS 0.5
- AC SERVO MOTOR
- MODEL BiS 0.5/6000
- STRAIGHT SHAFT
- NO KEYWAY
- BiA 1000 ENCODER
Buy a FANUC AC Servo motor A06B-0115-B103. This is a FANUC Model Beta iS 0.5/6000 motor. The speed is 6000rpm. This motor has a straight shaft of 9mm. The motor A06B-0115-B103 includes a FANUC Absolute encoder BA64IA. Each FANUC Motor Beta iS comes with a warranty. This Fanuc Beta motor is ready to replace your defective part.
The FANUC AC Servo Motor βi series A06B-0115-B103 is an AC servo motor suitable for feed axes and peripherals of machine tools, and industrial machines. This servo motor realizes high cost-performance when combined with a small-capacity amplifier. A low-indexing-error optical encoder (Pulsecoder) is built into the motors. This Pulsecoder enables precise positioning.
All AC Servo motors Bi series feature Pulsecoder (optical encoder). The Pulsecoder outputs position information and an alarm signal.
Another module: | IC694MDL230 | 120 VAC Isolated Input (8 Points) |
| IC694MDL231 | 240 VAC Isolated Input (8 Points) |
| IC694MDL240 | 120 VAC Input (16 Points) |
| IC694MDL241 | 24 VAC/VDC Input (16 Points) |
| IC694MDL250 | 120 VAC Isolated Input (16 Points) |
| IC694MDL260 | 120 VAC Input (32 Points)** |
| IC694MDL632 | 125 VDC Input (8 Points) |
| IC694MDL634 | 24 VDC Input, Neg/Pos Logic (8 Points) |
| IC694MDL645 | 24 VDC Input, Neg/Pos Logic (16 Points) |
| IC694MDL646 | 24 VDC Input, Neg/Pos Logic, 1 msec Filter (16 Points) |
| IC694MDL654 | 5/12 VDC (TTL) Input, Neg/Pos Logic, (32 Points) |
| IC694MDL655 | 24 VDC Input, Neg/Pos Logic, 1 ms, (32 Points) |
| IC694MDL660 | 24 VDC Input (32 Points)** |
| IC694ACC300 | Input Simulator Module (8 Points) |
Our brand:
Order Process:
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.
3, We can according to your shipment to ship out the goods, Or we also can help you to ship out the goods directly. And the tracking number will send you by the next day.
4., Usually for our inventory goods only need to take about 3-5 days.
5. If you also have any questions, you can ask me any time, right below is my contact.
FAQ
* Q: Do you provide a warranty for the goods? A: Yes, we provide a warranty for all the goods from us.
* Q: Could Wisdomlong provide technology support?
A: We're in this field for more than 8 years. If there's any problem, please contact with us, we'll provide a suggestion from our
engineer to help you solve the problem.
* Q: Does Wisdomlong keep goods in stock or only trading?
A: We have a large warehouse for goods. Keep lots of goods in the warehouse, so could promise a fast delivery.
* Q: What is your MOQ?
A: We provide you small MOQ for each item, it depends on your specific order!
* Q: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
* Q: How do you make our business long-term and good relationship?
A: We keep good quality and competitive price to ensure our customers benefit ;
We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Send your Inquiry details in the Below, Scan "The QR Code" Now!
|
|
FANUC GE A06B-2115-B103 AC SERVO MOTOR BIS0.5/6000 B64IA 50/60 HZ 3 PHASE CNC Images
|
